Overview of material qualities
As of: 04/2018
| Br | Hc B | Hc J | BH max | Dichte Density |
Binder | Zugfestigkeit Tensile strength |
E-Modul Young-modulus |
Bruchdehnung Elongation strength |
Temperaturbereich Temperature range |
Temperature coefficient Br | Temperature coefficient iHc | |||
| Materialtyp Material typeMaterialtyp Material type |
[mT] | [kA/m] | [kA/m] | [kJ / m³] | [g/cm³] | [MPa] DIN EN ISO 527-1[MPa] DIN EN ISO 527-1 |
[GPa] DIN EN ISO 527-1[GPa] DIN EN ISO 527-1 |
[%] DIN EN ISO 527-1[%] DIN EN ISO 527-1 |
[°C] ~ DIN 53460[°C] ~ DIN 53460 |
[%/°K] | [%/°K] | |||
| type | type | type | type | type | type | type | type | min | max | type | type | |||
| TROMADUR® 2/18p | isotropic | 120 | 85 | 220 | 3 | 3.28 | PA11 | 60 | 12 | 1 | -40 | 125 | -0.2 | 0.3 |
| TROMADUR® 4/20p | anisotropic | 170 | 130 | 265 | 5.5 | 2.87 | PA11 | 54 | 7 | 1.7 | -40 | 125 | -0.2 | 0.3 |
| TROMADUR® 2/17p | isotropic | 140 | 95 | 200 | 3.5 | 3.50 | PA6 | 86 | 26 | 0.6 | -40 | 125 | -0.2 | 0.3 |
| TROMADUR® 5/18p | anisotropic | 190 | 140 | 200 | 7 | 2.83 | PA12 | 55 | 7 | 2.5 | -40 | 125 | -0.2 | 0.3 |
| TROMADUR® 10/22p | anisotropic | 250 | 180 | 240 | 12 | 3.38 | PA6 | 75 | 18 | 1.9 | -40 | 125 | -0.2 | 0.3 |
| TROMADUR® 13/22p | anisotropic | 270 | 195 | 240 | 14.5 | 3.60 | PA12 | 68 | 16 | 2 | -40 | 125 | -0.2 | 0.3 |
| TROMADUR® 10/24p | anisotropic | 240 | 185 | 270 | 11.5 | 3.29 | PA11 | 64 | 13 | 4.8 | -40 | 125 | -0.2 | 0.3 |
| TROMADUR® 13/21p | anisotropic | 275 | 200 | 246 | 15 | 3.50 | PA12 | 70 | 15 | 2.8 | -40 | 125 | -0.2 | 0.3 |
| TROMADUR® 12/21p | anisotropic | 265 | 190 | 240 | 13.5 | 3.50 | PA11 | 60 | 14 | 3.5 | -40 | 125 | -0.2 | 0.3 |
| TROMADUR® 12/17p | anisotropic | 270 | 195 | 240 | 14 | 3.58 | PA6 | 83 | 17 | 1.1 | -40 | 125 | -0.2 | 0.3 |
| TROMADUR® 13/21p | anisotropic | 270 | 195 | 245 | 14 | 3.55 | PA6 | 92 | 22 | 1 | -40 | 125 | -0.2 | 0.3 |
| TROMADUR® 13/23p | anisotropic | 265 | 195 | 245 | 14.5 | 3.44 | PA12 | 70 | 14 | 3.3 | -40 | 125 | -0.2 | 0.3 |
| TROMADUR® 8/22p | anisotropic | 225 | 175 | 290 | 10 | 3.10 | PA11/12 | 60 | 8 | 6 | -40 | 125 | -0.25 | 0.3 |
| TROMADUR® 10/20p | anisotropic | 240 | 170 | 235 | 11.5 | 3.40 | PPS | 55 | 26 | 0.3 | -40 | 180 | -0.2 | 0.3 |
| TROMADUR® 10/20p | anisotropic | 245 | 185 | 255 | 12 | 3.40 | PPS | 41 | 25 | 0.3 | -40 | 180 | -0.2 | 0.3 |
| TROMADUR® 11/55p | isotropic | 275 | 190 | 590 | 13 | 3.95 | PA11 | 40 | 8 | 1.4 | -40 | 125 | -0.2 | -0.4 |
| TROMADYM® 44/61p | isotropic | 535 | 360 | 700 | 48 | 4.93 | PA12 | 63 | 20 | 1.1 | -40 | 100 | -0.11 | -0.5 |
| TROMADUR® 18/36p | isotropic | 365 | 195 | 375 | 22 | 4.03 | PA12 | 50 | 9 | 2.4 | -40 | 125 | -0.2 | 0.3 |
| TROMADYM® 42/44p | isotropic | 535 | 320 | 560 | 44.5 | 4.89 | PA12 | 45 | 17 | 0.6 | -40 | 100 | -0.11 | -0.5 |
| TROMADYM® 44/60p | isotropic | 555 | 385 | 740 | 53.5 | 4.98 | PA12 | 46 | 20 | 0.5 | -40 | 100 | -0.11 | -0.5 |
| TROMAMAX® 60/66p | anisotropic | 605 | 440 | 740 | 69 | 5.34 | PA12 | 44 | 16 | 0.5 | -40 | 125 | -0.03 | -0.2 |
| TROMADUR® 13/21p | anisotropic | 270 | 200 | 265 | 14.5 | 3.61 | PA6 | 90 | 24 | 1.5 | -40 | 125 | -0.2 | 0.3 |
| TROMADUR® 13/21p | anisotropic | 270 | 200 | 250 | 14.5 | 3.51 | PA12 | 57 | 14 | 2.4 | -40 | 125 | -0.2 | 0.3 |
| TROMADUR® 10/22p | anisotropic | 240 | 185 | 280 | 11.5 | 3.25 | PA6 | 95 | 18 | 2 | -40 | 125 | -0.2 | 0.3 |
| TROMADUR® 13/23p | anisotropic | 270 | 300 | 250 | 14 | 3.54 | PA12 | 50 | 11 | 2 | -40 | 125 | -0.2 | 0.3 |
| TROMADYM® 38/65p | isotropic | 510 | 325 | 670 | 42.5 | 4.96 | PPS | 40 | 29 | 0.1 | -40 | 180 | -0.11 | -0.5 |
| TROMADYM® 45/80p | isotropic | 540 | 365 | 870 | 49 | 5.27 | PPS | 42 | 33 | 0.1 | -40 | 180 | -0.12 | -0.5 |